Main structure：
Main structure of VSI5X series crusher (Figure 1): riveted frame base, main shaft assembly, rotator assembly, transmission motor assembly, frame, hydraulic jacking assembly and double sides’ falsework. Auxiliary parts: electrical system, lubrication system.
Working principle：
Feed at center (figure 2): Materials fall into the hopper and then through the central well enter the high speed rotator which will throw out the materials with high speed. Firstly, the materials strike with the materials that are free falling down. Secondly, materials strike the materials-liner in the vortex or the impact liner and are rebounded to the top of crushing cavity and then deflecting fall down. Thirdly, the falling materials with the shoot materials form a continuous materials curtain. Lastly, crushed materials be discharged from the under discharging opening.
Specification:
| SBM-VSI crusher (Hydraulic) Key Specification: |
| Model |
VSI7611 |
VSI8518 |
VSI9526 |
VSI1140 |
Capacity
(t/h) |
Feed both
at center and
at sides |
120-180 |
200-260 |
300-380 |
450-520 |
| Feed at center |
60-90 |
100-130 |
150-190 |
225-260 |
Max feed size
(mm) |
Sofe material |
＜35 |
＜40 |
＜45 |
＜50 |
| Hard material |
＜30 |
＜35 |
＜40 |
＜45 |
| Rotation speed (r/min) |
1700-1890 |
1520-1690 |
1360-1510 |
1180-1310 |
| Power(KW) |
110-150 |
180-220 |
264-320 |
400-440 |
Overall dimension
L*W*H (mm) |
3700*2150
*2100 |
4140*2280
*2425 |
4560*2447
*2778 |
5000*2700
*3300 |
| Weight (t) |
7.8 |
10.3 |
16 |
25.6 |
| Power supply |
380V, 50HZ |
| Vibrating sensor |
detect range: 0.1-20mm/s continous and adjustable |
Lubrication
and hydraulic station |
power |
2*0.31KW |
| Safety assuance |
Double oil pumps assure enough oil supply; automatic switch off with no oil stream or hydraulic strength; lower the temperature with cool water in summer; raise the temperature with motor in winter. |
| Overall demension L*W*H (mm) |
|
820*520
*1270 |
820*520
*1270 |
|
| Power of oil tank heater |
2KW |
Note: This specification is just reference, any changes are subject to the products
