Operating principle
Vibrating feeder consists of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrator is made of two fixed eccentric shafts whose gears are jogged. When installation, the two gears must be jogged according to the sign. Through drive of the motor, the two eccentric shafts start rotating to produce a linear huge power which forces the feeder to vibrate. Through the vibration, The materials will slip and sling on the funnel, moving forward, when the materials pass the screening part, smaller parts will fall down, avoiding the further crushing, so screening purpose can be reached.
Specifications:
| Model |
Max input size
(mm) |
capacity
(t/h) |
motor power
(kw) |
Installaition
Slope |
weight
(kg) |
Size of Funnel
(mm) |
| GZD-180×80 |
300 |
30-80 |
2×1.5 |
0-10 |
0.8 |
1800×800 |
| GZD-200×120 |
300 |
80-500 |
2×2.2 |
0-10 |
0.9 |
2000×1200 |
| GZD-300×90 |
500 |
40-100 |
2×2.2 |
0-10 |
1.5 |
3000×900 |
| ZSW-380×96 |
500 |
90-100 |
11 |
0° |
5.0 |
4200×1100 |
| ZSW-420×110 |
580 |
150-350 |
15 |
0° |
5.5 |
4900×960 |
| ZSW-490×110 |
580 |
180-380 |
15 |
0° |
5.32 |
4900×1100 |
| ZSW-490×130 |
750 |
250-450 |
22 |
0° |
5.9 |
4900×1300 |
| ZSW-600×150 |
800 |
400-800 |
30 |
0° |
8.67 |
6000×1500 |
Note: This specification is just reference, any changes are subject to the products.
